Kawasaki KLX 110 L Big Bore & Cam Kit 143cc Bolt On Power! Upgrade Fast TBW9213

  

TB Parts 143cc Big Bore & Cam Performance Kit (60mm). TB Parts 143cc big bore kit with our. Bolt on performance camshaft kit. The combination of these parts amplify the results!

The cam opens up the valves more so then the larger bore kit can breath better resulting in even more power throughout the power curve! You will not believe the night and day difference this setup makes over the stock engine! The all aluminum ceramic coated cylinder is lighter than a steel sleeved aluminum cylinder, reduces friction (increasing power), improves sealing, and provides better heat transfer (runs and cools down quicker). The domed high compression piston (10.9:1 pump gas friendly) and complete head gasket kit set this kit apart from other similarly priced 143 kits on the market. Our camshaft grind has years of R&D built into it too.

Gains are 20% over stock throughout the RPM range unlike most other cams that shave power off the bottom end to move it all up-top. Not to mention this camshaft is brand new, not a regrind, and includes brand new Taiwan TPI bearings made to OEM specifications.

This is an affordable way to make your KLX110 engine race ready and a lot more fun to ride! High quality parts and requires no machining to the cases or other modifications - bolt on and go! Ceramic coated all aluminum cylinder (no steel sleeve). Lightweight high compression domed 60mm piston with rings, pin, & clips for the stock cylinder head. 10.9:1 compression safe for use with pump fuel. Head gasket kit - Now includes the cylinder head o-ring set and an exhaust gasket. Brand new camshaft and bearings. Complete bolt on engine kit.

For 2017 & Newer KLX110's. There are no installation instructions, but if you can replace your piston, you can install this kit. If you don't have any experience working on your engine, we highly recommend having a professional technician install this kit or, at a minimum, purchasing the shop manual for your bike available from your local Kawasaki or Suzuki dealer. The parts are installed in the same manner as the OEM parts.

Note - Bolt on kit for 2017+ KLX110s. Camshaft kit is for use with the stock.

His is not a decompression cam like OEM, but will not affect starting. Carburetor tuning will be required for optimal performance, +1 size up on the pilot jet and +2 sizes up on the main jet is a good starting point. Have any questions or concerns?

Please send us a message and we will gladly help with any questions you may have. We have been in the motorcycle parts industry for over a decade and are here to help. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Engines & Engine Parts\Engine Rebuild Kits & Components". The seller is "keystonecyclepartsllc" and is located in this country: US.

This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Republic of Croatia, Malaysia, Brazil, Colombia, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Israel, Bahrain, Chile, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica.

1. Manufacturer Part Number: TBW9213
2. Brand: TB Parts